Frame Rail arrival & inspection

Frame Rails, working with frame fixture, measuring, welding

Boxing Frame Rails

Installing Crossmembers

Front Spring
C Notches

Bob rear
frame rails

U-Coat It

Assemble Frt Suspension

Installing Ladder bars - Rear end

Sandblasting & Powder Coating

Sponsor Sign & Chassis

04 Ladder Bar

Install Engine & Trans

IN 600 Street Induction Product

Steel Tubing Structure

Installing Windshield

Mounting Rats Glass Body to Chassis

Mounting Radiator, Grill Shell & Insert

Mounting of the Pulleys

Mounting of Steering Column

Wheel and Tire Combination

Duvall Gets Chrome

To illustrate the outline better than the pencil tracing we traced the outline with a magic marker.
The casting has on the bottom surface taped holes for stainless studs that will pass through the cowl and secure the casting. Mark the locations of the holes along the front edge of the casting. Place the casting back on the cowl and align it with the tracing on the tape.
Transfer the locations of the holes to the traced line.

The marks are now used to locate the stud holes on the tape. Measure the distance back from the leading edge on the casting for each location. Transfer the locations to the tape.  Measure the hole locations and check them twice.  These locations will be drilled through the cowl.

Click Here For Next Page