|
MSD’s Blaster EFI system is an affordable electronic fuel injection system that delivers wide-band oxygen sensor feedback and onboard data acquisition (without a laptop connected). This means you get a closed loop EFI system that is constantly monitoring the exhaust gases and making adjustments to achieve the best performance possible. From idle to wide open throttle, the Blaster EFI system will deliver great driveability and performance!
The Blaster EFI system was developed in conjunction with the EFI wizards at Big Stuff 3. The system is a bank-fire set-up so there is no cam synchronization signal needed, which simplifies installation. From there, you can tweak and tune with the easy to use software to fit your driving style and need.
One helpful tool for tuning is the on-board data acquisition feature of the Blaster. This will allow you to review selected engine management variables to be recorded in real time as fast as 50 times per second, with 10-bit resolution, for up to 5.5 minutes. Once recorded, the data can be analyzed off-line with the supplied MSD software.
The main harness is clearly labeled and easy to connect to common GM type sensors. The only items you’ll need to purchase separately are an injector harness (V8, V6 or 4-cylinder) and a distributor harness to match your ignition. Get your muscle car or street rod to perform its best with modern technology from MSD’s Blaster EFI System.
Blaster EFI System (PN 2450)* Available Spring 2007!
|
