Header__ARTICLEShorter
NewLogo1

"BEST TOOL SINCE THE INVENTION OF THE HAMMER!"

KoulTools3

Since the invention of stainless braided rubber hose, racers and mechanics have been fighting the problem of installing it into the socket part of the assembly. If your lucky and get a clean cut on the end of that hose, you might get it in. Most of the time a little fuzz appears on the hose end and the battle begins. It is not only time consuming, it can get bloody. KOUL tools has delivered a solution that makes the assembly a snap. Manufactured of a high tech composite, it is virtually indestructible. No need to worry about vise marks or wearing out. Just insert the socket into the tool, twist the hose in, and in less than 10 seconds you have it

 assembled. You can repeat this several times without recutting the hose end. The tool can pay for itself the first time you don't have to scrap some hose because it got too short trying to clean up the end. You'll be amazed at the amount of time you'll save. After using this tool, you will say to yourself, "KOUL".

 See how easy KOUL Tools™ are to use.

Visit the "KOULtools™ Channel on YouTube.

 

KOULtools™ are simple to use and will save time and fingers from the frayed ends of a braided hose .

After choosing the correct "KOULtool™" for your fittings socket size, simply place the socket and adaptor ( if required ) into the "KOULtools™" and clamp it into a vise.

Lube the funnel entrance and twist the hose into the socket.

Check to see if the hose is in position.
You are done in seconds!

KoulTools

SMALL KIT
p/n 468

468kit_lg

The small kit contains the capsules to install -4, -6, -8 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up the some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit in the funnel. The two spacers are used in some -6‘s and 8‘s. If the socket seems loose in the tool, use a spacer to tighten it up. In the small kit, only the Russell -4 needs a sleeve. Not for use with Teflon-style hose.

LARGE KIT
p/n 1016

1016kit_lg

The large kit contains the capsules to install -10, -12, -16 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit into the funnel. In the 1016 kit, all the -16’s except Russell’s require the sleeve and a rear spacer. See the instructions in the case for the proper spacer number. Most of the -10’s and 12’s* will use a spacer. Not for use with Teflon-style hose.

* -12 is a stainless washer.

HOT ROD KIT
p/n 681

681kit_lg

The Hot Rod kit contains the capsules to install -6, -8, -10 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit into the funnel. Spacers are used in some -6‘s, -8‘s, and most -10's. If the socket seems loose in the tool, use a spacer to tighten it up. See the instructions in the case for the proper spacer number. Not for use with Teflon-style hose.

For information, contact Koul Tools LLC at sales@koultools.com or visit our website at www.koultools.com or call (928) 854-6706

[ Home Page] [2011 Show Coverage] [Barn & Field Cars] [Blast to the Past] [Book Reviews] [Build Articles] [Buyers Guide] [Classifieds] [Club Directory] [Event Listings] [From our Friends] [Garage Shots] [Guest Columnists] [www.hotrodhotline.com/md] [New Products] [Newsletter Archive] [Order a Catalog] [Our Heroes] [Press Releases] [Rodders Forum] [Rodders Row] [Shop Tours] [Vendor Directory] [Young Rodders]
[Advertising Information] [Modern Rods]

Copyright 1999 - 2011 Hot Rod Hot Line All Rights Reserved
No Portion May Be Used Without Our Written Permission
Contact Us Toll Free (877) 700-2468 (US) or (208) 562-0470 (Outside US)
230 S. Cole Rd, Boise, ID 83709

mailbox