VIP Sponsors

Sponsors

Compu-Tronix DIS4-F2.3L DISTRIBUTORLESS IGNITION SYSTEM FOR FORD 2.3L ENGINES.

THE HIGHEST PERFORMANCE IGNITION SYSTEM AVAILABLE FOR THE FORD 2.3 L ENGINE!

With D-W-E-L-L Control, Internal Tach Driver and Static Timing LED Light
 

The DIS4 (Distributorless Ignition System) is derived from new technology created by OEM’s to improve timing issues, energy loss, spark degradation and low emission standards associated with normal distributors. By isolating the electronics and incorporating them into our billet aluminum lid, we are able to retrofit technology from this century into your classic car. Improving timing consistency at all RPM’s, no loss in energy due to spark degradation, better fuel economy, easier start-up and more power!
The DIS4 is built rugged to handle any terrain… Water, dirt or sand cannot enter the DIS4. It’s a completely sealed unit!


Maintenance you ask? There is none… The DIS4 is completely maintenance free!

Why DIS?
Standard distributors distribute a spark to each plug in turn, from a single coil. At higher RPM’s, they cannot charge and discharge the coil fast enough to deliver a full charge to the spark plugs. The DIS4 solves this problem through the use of two 60,000 volt coils charging and discharging in turn, allowing each coil sufficient time to charge and discharge a full spark. This equals more power.

Conventional cap and rotors allow for spark degradation, arcing and ozone as the current travels through the rotor and across to the cap contacts. By doing away with these antique parts, the DIS4 is capable of supplying a full energy charge from the coil to the spark plug with no loss.

Regardless of brand names, or claims to the contrary… The DIS system delivers more power than any single coil system, Bar None!

Math and Physics can’t be argued with. Simply put… It works!

 



 

Kit does not include coil pack mounting plate shown.

 
 

COMPLETE KIT INCLUDES ELECTRONIC DISTRIBUTOR, DUAL COIL PACK, COIL MOUNT BRACKET, 8mm SILICONE SPARK PLUG WIRES AND ALL NECESSARY HARDWARE

· 100% OUTPUT TO 12,000 RPM
· PRECISION CNC MACHINED ALUMINUM HOUSING, MADE IN THE U.S.A.
· SAY GOODBYE TO POWER ROBBING, LOW QUALITY IMPORT DISTRIBUTORS!
· SUPER “CLEAN” FLAT COIL PACK MOUNTING SYSTEM
· BUILT IN TACH DRIVER
· AUTOMATIC SHUT DOWN IF IGNITION SWITCH IS LEFT ON WITH THE ENGINE NOT RUNNING
· INCLUDES 8 mm SILICONE HIGH VOLTAGE WIRE SET