- Item Location:
- Saint Clair, MO
- Seller: pemracing
- Phone: 636-629-6200
General Motors 1964 - 1967 A Body New Flanged Housing 60.5" Stock pinion Location with Big Ford Housing Ends
Wheel mounting flange to wheel mounting flange will be 60.5" with axles installed
1964-1967 Chevelle, Cutlass, Regal, Lemans, GTO, ect. 60.5" track width with brakes installed.
REAR END YOKE SIZE AND
FILL AND DRAIN PLUGS (NONE OR 1/2 NPT IF REQUESTED WHEN YOU ORDER)
**********( WE CAN NOT BUILD UNTIL THE ABOVE OPTIONS ARE CHOSEN!!!)************
Ford 9 Inch for A Body New Flanged Housing 60.5" Stock pinion Location with Big Ford New Style Housing Ends. 64-67 GM Midsize Cars.
Wheel mounting flange to wheel mounting flange will be 60.5" with axles installed (2 1/2" offset axles)
Stock rear end pinion yoke location between wheel flanges when center section is installed.
Standard driveshaft location to the right exactly like a General Motors rear.
New Stamped Housing with new 3" x .188" wall DOM tubing.
Big Ford New Style (torino) housing ends with .375" (3/8") bolt holes
new studs installed in housing
Nodular Iron Trac Loc Center Section 9" Ford with 31 spline US Gear ring & pinion, Assembled.
FREE Shipping! The Center Section will be Assembled and set up for Street by Professionals.
ALL NEW UNIT!
Nodular Iron Gear case and Nodular iron Stock size Pinion Support.
9 inch Ford US GEAR 8620 Street Series Ring & Pinion (ratios 3.25, 3.50, 3.70, 3.89, 4.11 or 4.30).
2.89" OD Bearing size x 1.78" ID bearing surface. nodular iron 5 bolt pinion support.
CHOOSE Rear End Yoke: choose 1310 series (3 7/32" wide with 1 1/16" cap OD) or 1330 series 3 5/8" wide with 1 1/8" cap OD) rear end yoke.
9 inch Ford PEM 31 spline Trac Loc Carrier (posi clutch style unit) must use bottle of friction modifier in your lube
Package includes: PEM nodular iron case, iron pinion support, pinion bearings & races, pinion bolts, pinion depth shims, pinion seal, pinion nut, side bearings & races, premium ring gear bolts, tail bearing and tail bearing retainer plate.
All bearings and seals are Premium Brands ( either Timken or Koyo).
Also comes with big housing gasket, u-bolts for yoke and 4 ounce bottle of friction modifier.
We will build this center section after you verify the ratio of ring & pinion and the yoke series you want.
PEM Econo Rear Disc Brake Kit with Emergency Brake Calipers for 9" Ford
This 9 inc Ford Disc Brake Kit kit includes bolt-on caliper brackets
11-1/4" vented rotors with 5 on 4-1/2" and 5 on 4-3/4" bolt circles
Rotor is 11.25" OD x .960" wide
Rotor had hub register of 2.78" OD
Rotor has 6.25" Inside Diameter
Rotor offset of 2.25"
Bolt patterns have 1/2" stud holes to accommodate 1/2" studs
The brackets fit the Large Old Style Ford and the New Style Large Torino Housing Ends shown in picture # 11 above.
'78-'88 GM emergency brake calipers, brake pads and hardware.
Minimum 15" diameter wheels.
Caliper piston size is 2.375" OD.
And Reproductive Harm-
FREE SHIPPING IN THE CONTINENTAL UNITED STATES!
THIS WILL BE SHIPPED BY TRUCK FREIGHT TO A COMMERCIAL ADDRESS. MUST HAVE A LOADING DOCK OR A FORK LIFT.