- Item Location:
- Saint Clair, MO
- Not Make Specific
- Seller: pemracing
- Phone: 636-629-6200
Ford 9 inch New Smooth Back 49-63" wide HD Rear End Housing with 31 spline axles and hardware.
TRACK WIDTH INCLUDING BRAKES
REAR END YOKE SIZE AND
**********( WE CAN NOT BUILD UNTIL THE ABOVE OPTIONS ARE CHOSEN!!!)************
Centered rear end pinion yoke between wheel flanges when center section is installed.
49-63" track width from wheel flange to wheel flange.
this rear end will measure 49-63" wide when big bearing 9" Ford Axles are installed with 2.5" brake spacing.
axle housing is Track Width minus 5" from housing end to housing end without axles
flanged 31 spline axle axles have 3.15" bearings installed
axles are cut to length to match the housing, 29.56" passenger side and 25.31" driver side.
axles have three bolt patterns in all axles, 5 x 4.5" small ford, 5 x 4.75" GM and 5 x 5".
new Round Smooth Back stamped HNF9 center housing with new 3" x .188" wall DOM tubing.
1/2" press in Moroso wheel studs included
Housing ends are New Style Big Ford with .375" (3/8") bolt holes
Nodular Iron Trac Loc Center Section 9" Ford with 31 spline US Gear ring & pinion, Assembled.
FREE Shipping! The Center Section will be Assembled and set up for Street by Professionals.
ALL NEW UNIT!
Nodular Iron Gear case and Nodular iron Stock size Pinion Support.
9 inch Ford US GEAR 8620 Street Series Ring & Pinion (ratios 3.25, 3.50, 3.70, 3.89, 4.11 or 4.30).
2.89" OD Bearing size x 1.78" ID bearing surface. nodular iron 5 bolt pinion support.
CHOOSE Rear End Yoke: choose 1310 series (3 7/32" wide with 1 1/16" cap OD) or 1330 series 3 5/8" wide with 1 1/8" cap OD) rear end yoke.
9 inch Ford PEM 31 spline Trac Loc Carrier (posi clutch style unit) must use bottle of friction modifier in your lube
Package includes: PEM nodular iron case, iron pinion support, pinion bearings & races, pinion bolts, pinion depth shims, pinion seal, pinion nut, side bearings & races, premium ring gear bolts, tail bearing and tail bearing retainer plate.
All bearings and seals are Premium Brands ( either Timken or Koyo).
Also comes with big housing gasket, u-bolts for yoke and 4 ounce bottle of friction modifier.
We will build this center section after you verify the ratio of ring & pinion and the yoke series you want.
PEM Econo Rear Disc Brake Kit with Emergency Brake Calipers for 9" Ford
This 9 inc Ford Disc Brake Kit kit includes bolt-on caliper brackets
11-1/4" vented rotors with 5 on 4-1/2" and 5 on 4-3/4" bolt circles
Rotor is 11.25" OD x .960" wide
Rotor had hub register of 2.78" OD
Rotor has 6.25" Inside Diameter
Rotor offset of 2.25"
Bolt patterns have 1/2" stud holes to accommodate 1/2" studs
The brackets fit the Large Old Style Ford and the New Style Large Torino Housing Ends shown in picture # 11 above.
'78-'88 GM emergency brake calipers, brake pads and hardware.
Minimum 15" diameter wheels.
Caliper piston size is 2.375" OD.
And Reproductive Harm-
FREE SHIPPING IN THE CONTINENTAL UNITED STATES!
THIS WILL BE SHIPPED BY TRUCK FREIGHT TO A COMMERCIAL ADDRESS. MUST HAVE A LOADING DOCK OR A FORK LIFT.