HotRod_MD

LEAF SPRING SUSPENSION

Control arms are not required on leaf spring suspensions.  The leaf spring is connected to the axle housing with U-bolts and to the frame by bolts in the front and by a shackle assembly in the rear.  The shackle assembly allows spring movement.

In both applications, shock absorbers connect between the axle housing and the frame and absorb excess energy from the system.  If the vehicle is being used to carry heavy loads or tow trailers, load-assist shock absorbers are recommended

Back to Steering Suspension Sub Categories

Also see:   Springs


IMPORTANT NOTICE: All content in the articles in this section are the property of the author of the article and all advice and instructions are intended to be just basic guidelines for the undertaking of any project, and not intended for use by individuals who are not experienced in the particular field. We advise that you contact the manufacturer of any product or tool you are using for complete instructions. We also advise you to always use the appropriate safety equipment for the tools and products you are using. Hotrodhotline.com and its contributors disclaim any responsibility for the consequences of using the articles or procedures described in any of the articles in this section and by using this site you agree to these terms. No portion of any of these articles may be used without the written permission of HotRodHotLine.com and the Author.

Copyright 2007-2011  Hotrodhotline.com   All Rights Reserved
No Portion may be used without our written permission
Contact Us:    877-700-2468   or   208-562-0470
230 S. Cole Rd, Boise, ID  83709