Things to do with a Bracket


	RESOURCES:

Things To Do With a Bracket” Tips from Welder Series

NEWS: I've ordered clamshell packages for all our little gussets, tubes, spacers, and small kits like hairpin axle brackets, U bolt kits, U bolt eliminator kits, adjuster kits, etc. This will make it much easier to display Welder Series product on pegboard. Keep some gussets in stock so they're always ready when you need them! I will also be making some multi-piece packages so you can buy a quantity of small parts at a time with one easy part number.


	Life for this little tab started out as part #12911 brake pedal pad bracket. I basically used it because it's stainless and it has a 3/8" hole. It makes a great semi hidden tab to hold the fuel line to the back of the head.




	Grant Schwartz of Schwartz Welding used #20492 frame mounts for his custom tranny mount


	I used a few exhaust brackets (part #21348) to mount the bench seat in the '32. The front mount uses full height brackets, but for the rear brackets I bent them to allow the rear to sit lower.




	Rear Bracket




	This is the front bracket... I made use of the tabs that were already on the Wise Guys seat. I welded the two vertical brackets to a plate that bolts to the floor


	Go Back to Plumbing and Fastener Menu

IMPORTANT NOTICE: All content in the articles in this section are the property of the author of the article and all advice and instructions are intended to be just basic guidelines for the undertaking of any project, and not intended for use by individuals who are not experienced in the particular field. We advise that you contact the manufacturer of any product or tool you are using for complete instructions. We also advise you to always use the appropriate safety equipment for the tools and products you are using. Hotrodhotline.com and its contributors disclaim any responsibility for the consequences of using the articles or procedures described in any of the articles in this section and by using this site you agree to these terms. No portion of any of these articles may be used without the written permission of HotRodHotLine.com and the Author.