HotRod_MD

RESOURCES:

 

Remote Reservoir   Type II Power Steering Pump

Article contributed by  Alan Grove Components

     General Motors in the early 1980’s started using the GM/Saginaw TC metric power steering pump. It is more commonly referred to in the street rodding industry as the Type II power steering pump. There are two basic pumps that will work well with our pump brackets. These pumps will have all mounting holes threaded which will require the two main mounting holes to be drilled out to 5/16’ for use with our brackets. The main differences in these two power steering pumps are the low pressure return. The 1987
Pontiac Sunbird pump is to be used with a hose and a remote reservoir canister. Hose kits and reservoirs are available from  your favorite dealer. The 1985-86 Chevrolet Cavalier pump is to be used with a plastic attached reservoir and retainer clips shown below, which is available from us or other dealers.

type II pic 1

*G.M. Saginaw Type 2 pump pressure 1000-1100 p.s.i., Mustang - Pinto Rack & Pinion 820-870 p.s.i.
Saginaw pump pressure may be decreased with the use of a - Flow Valve Shim Kit part number 1001 available from us. General Motors in the early 1980’s started using the GM/Saginaw TC metric power steering pump. It is more commonly referred to in the street rodding industry as the Type II power steering pump. There are two basic pumps that will work well with our pump brackets. These pumps will have all mounting holes threaded which will require the two main mounting holes to be drilled out to 5/16’ for use with our brackets. The main differences in these two power steering pumps are the low pressure return. The 1987 Pontiac Sunbird pump is to be used with a hose and a remote reservoir canister. Hose kits and reservoirs are available from various sources, or your favorite dealer. The 1985-86 Chevrolet Cavalier pump is to be used with a plastic attached reservoir and retainer clips shown below. These pumps have a 17MM shaft for use with an aftermarket (press fit) aluminum V-Groove or
serpentine pulley. -Aluminum V-Groove pulleys are available from Us, -Serpentine pulleys for use with our LT-1 bracket system are available form March Performance (734)-729-9070, Our power steering pump bracket 405L uses serpentine pulley #619. Power steering pump bracket 406L uses serpentine pulley #618 Remote Reservoir
Pumps and other steering related parts are available from , Durex (800)-482-8283 and most street rod parts vendors or parts stores
.

APPLICATIONS:

tYPE ii   PIC 2
type II pic 3

This article and diagrams were provided by Alan Grove Components for use with their products.  Please contact them for further information or contact your manufacturer for specific diagrams or instructions.

 

Return to Engine  Menu


IMPORTANT NOTICE: All content in the articles in this section are the property of the author of the article and all advice and instructions are intended to be just basic guidelines for the undertaking of any project, and not intended for use by individuals who are not experienced in the particular field. We advise that you contact the manufacturer of any product or tool you are using for complete instructions. We also advise you to always use the appropriate safety equipment for the tools and products you are using. Hotrodhotline.com and its contributors disclaim any responsibility for the consequences of using the articles or procedures described in any of the articles in this section and by using this site you agree to these terms. No portion of any of these articles may be used without the written permission of HotRodHotLine.com and the Author.

Copyright 2007-2011  Hotrodhotline.com   All Rights Reserved
No Portion may be used without our written permission
Contact Us:    877-700-2468   or   208-562-0470
230 S. Cole Rd, Boise, ID  83709