VIP Sponsors

Sponsors

Measure Twice, Buy Once by Wheel Vintique

 

Measure Twice, Buy Once
Learn The Right Way To Measure for Wheel Sizes Before You Make An Order

So, you want a new set of wheels for your hot rod or muscle car. That’s totally understandable because wheels go in and out of style all the time. With this in mind, Wheel Vintiques is making alternative sizes in the same styles you’ve grown fond of, over the years. New sizes and wheel styles are always welcome in the automotive aftermarket, but it’s always important to measure your car before making a big purchase. The last thing you want is to have clearance issue with your brand new tires or wheels!

Every car is different, so picking wheels isn’t quite as easy as it seems. You should definitely do your homework before making an order, and it will pay off with a smooth transaction and an easy installation when it’s time to get rolling. Most gear heads want the largest possible tires and wheels on their ride, so measuring for maximum width and back spacing is an important part of the selection process.

The first step is to determine the size of the bolt pattern, also known as the bolt circle. Just as a quick reference, older cars (pre-WWII) had much larger bolt patterns, but today’s most common bolt patterns are 5x4.75 and 5x4.5. As a general rule of thumb, a 5x4.75 pattern is used on most GM passenger cars, while the 5x4.5 applies to many Ford and Mopar applications. With a five-lug pattern, measure from the outside edge of the first stud to the center of the third stud to find the correct measurement. Measuring center to center will not provide accurate results on five-lug patterns. However, all four, six and eight lug patterns are measured center-to-center on the studs.



Bolt Pattern

Another measurement to consider is the wheel’s backspacing.  To measure backspacing, place a straight edge on the inside lip of the rim, and then measure the distance between the mounting flange and the straight edge. There are several ways to measure your vehicle for tire and wheel clearances, but a measuring tape and a straight edge seem to be the most effective. Always check for turning radius up front, and account for tire sidewall bulge. 


Back Spacing

If there’s anything that might get in the way, be sure to account for it when measuring for rim spacing and give yourself a couple inches of wiggle room on inner side of the rim for sidewall bulge when the tire is inflated.


Rim Width

 

Wheel and tire dimensions can make or break your vehicle’s appearance, so get it right the first time by measuring for the correct diameter, width, backspacing and bolt pattern.

SOURCE
Wheel Vintiques
559-251-6957
www.wheelvintiques.com

Hotrod MD Category: 
URL: 
www.wheelvintiques.com