VIP Sponsors

Sponsors

Painless Performance Digital Power Manager w/Jump Start (500 amp)

Digital Power Manager w/Jump Start (500 amp)
 

The Digital Power Manager with Jump Start (500 amp) includes a weatherproof solid state dual battery control unit that automatically engages an auxillary battery when a large load is applied to the vehicle's main battery. In addition to this, for added amperage capacity from the auxillary battery; a 250 amp solenoid is included with a momentary push button switch to be mounted in a location that is reachable when turning the ignition key to start the vehicle.  This will allow for jump starting the vehicle by momentarily combining the vehicles two batteries while cranking the engine. The unit will not allow the electrical loads on the vehicle's main start battery to drain the auxillary battery lower than 11.5 volts and most likely, resulting in a no start situation. When the main battery is too low to crank the engine by itself, the Digital Power Manager in combination with the Jump Start solenoid button being pushed during cranking, will combine the main and auxillary batteries together to crank the engine. Once the engine is running and spinning the alternator again, it will only allow charging of the auxillary battery after the main battery is fully recharged by the alternator.

This solid state dual battery controller eliminates any second guessing when adding a secondary battery in vehicles with a 12 volt electrical system. The system is capable of temporarily switching up to 500 amperes of DC current for large loads such as high current starters, mid-size winches or even when jump starting another vehicle.  Ideal for any vehicle equipped with high power stereo systems, high amp driving lights or situations where there will be a load on the vehicles main battery for a reasonable period of time and the alternator will not be charging the two batteries. This kit, when properly installed, will add the additional boost needed to start a vehicle with a partically drained main battery.  Included in these kits:the weather-proof Digital Power Manager Unit, a 250 amp Jump Start solenoid, a momentary push-button switch, 6 gauge connection cables, terminals, heat shrink, mounting hardware and a remote indicator light.
 


 

Painless Performance asks..How often have you seen advertisements for wiring harnesses promising, "21-circuit kit for the low, low price of...?" What do you get for that low price? 21 circuits and yards of colored wire? Is that all you need, and exactly what makes up a proper wiring harness, anyhow? Well, it's a lot more than just circuits and wire. A wiring harness is, first and foremost, engineering. At Painless, all of our harnesses are designed by real engineers using the latest in diagnostic equipment and AutoCAD to ensure consistency in manufacturing and an accurate and easy installation. If you're looking for superior quality, engineering and craftsmanship, Painless is your only sensible choice. Painless has remained the leader in automotive wiring and electrical products for over twenty years through engineering and innovation, not corner cutting and imitation.

Painless Performance
2501 Ludelle St
Fort Worth, Texas 76105
817-244-6212