Header__ARTICLEShorter

Share this Article with a friend

Bookmark and Share  

mainban
were_your_source
wsls200

$138.80

Motor Mount Kit for GM LS-1 and LS-6

These mounts use a urethane bushing to insulate the motor from the frame. Frame mounts are to be trimmed to fit so the motor can be installed at the height required.

Parts included:
Listed by Photo Ref.# (if applic.): Description, Part #, Quantity Required
1: Plate, passenger's side main plate, formed, LS207, 1
2: Plate, driver's side main plate, formed, LS202, 1
3: Gusset, 2-3/4" x 2-1/4", LS206, 2
4: Plate, passenger's side center plate, formed, LS208, 1
5: Plate, driver's side center plate, formed, LS204, 1
6: Plate, 5-1/4" x 4", LS210, 2
7: Gusset, 6-1/4" x 3" with a 1-3/8" dia notch (for a 10092 tube), LS211, 2
8: Tube, 1-3/8" OD x 11 ga wall x 1-1/16" long, 10092, 2
Bolt, 10MM x 1.5 x 25, zinc plated, 330-096ZP, 8
Washer, 10MM lock, zinc plated, 672-006ZP, 8
Urethane bushing half. Can be used with 10092 tube and 18908 or 18910 tubes, 1203, 4
Tube, urethane bushing inner sleeve, 1/2" ID, 18908, 2
Bolt, 1/2-20 RH x 2-1/4" long, Grade 5 hex, zinc plated, B08FR2.25G5HZ, 2
Nut, 1/2-20 RH thin nylok, zinc plated, N08FRNTZ, 2

LS2006

For more info go to www.welderseries.com
or call 1-877-467-8662

[2010 Show Coverage] [Barn & Field Cars] [Blast to the Past] [Book Reviews] [Build Articles] [Buyers Guide] [Classifieds] [Club Directory] [Event Listings] [From our Friends] [Garage Shots] [Guest Columnists] [www.hotrodhotline.com/md] [New Products] [Newsletter Archive] [Order a Catalog] [Our Heroes] [Press Releases] [Rodders Forum] [Rodders Row] [Shop Tours] [Vendor Directory] [Young Rodders] [Advertising Information] [Modern Rods]

Copyright 1999 - 2010 Hot Rod Hot Line All Rights Reserved
No Portion May Be Used Without Our Written Permission
Contact Us Toll Free (877) 700-2468 (US) or (208) 562-0470 (Outside US)
230 S. Cole Rd, Boise, ID 83709

mailbox