Product Showcase

This section features the latest and greatest in New Products in our Industry. Check back often as we add new products every day !



Front Door Vent Weatherstrip from Steele Rubber

Steele Rubber Products now offers a front door vent window main seal. It replaces factory #4175696 and #4175697. This weatherstrip will fit 1950 - 1951 Cadillac Series 61 4 door sedans. read more...

ECI Inline Brake Light Switch

Tired of continuously replacing your outdated, unreliable hydraulic brake light switch? ECI has developed an inline brake light actuating assembly using a heavy duty electrical switch that has no exposure to the brake fluid in the system. This new assembly can be used to replace your existing hydraulic switch using a 1/8-NPT fitting, or can be directly installed into the brake line. The heavy... read more...

SeatHeater from Covercraft

Now heated seats are available for just about any vehicle on the road. The SeatHeater™ Seat Heating Kit from Covercraft is now available and can be installed directly onto vehicle seats or used underneath fitted seat covers like Covercraft SeatSavers or SeatGloves. The kit consists of a pair of seat heater elements for two seat bases and seat backs. Also included are the insertion “envelopes” for... read more...

Double Bend Nerf Bars from McMillan Rod & Custom

8” or 10” Double bend nerf bars w/ 20 degree brackets While built specifically for Ford Model A’s and 33/34 Fords, these nerfs can be used on the front or back of many street rods having frame horns that curve down. The mounting brackets have a 20 degree bend in them to keep the vertical bar square to the ground. These are built by McMillan Rod & Custom from high quality, solid type 304... read more...

Snider Fuel Block from O'Brien Truckers

Snider Fuel Block Burnished Finish Four drilled and tapped holes - two on top plus one on each end.   read more...

Real Steel 1933-34 Roadster Quarter Panels from Steve's Auto Restorations

Steve’s Auto Restorations in Portland Oregon is pleased to announce that they are once again producing their very popular 1933 – 1934 Roadster Quarter Panels as part of the Real Steel parts line. Each quarter panel is die-stamped using the original gauge sheet metal and includes the door jamb flange and trunk opening flange. S.A.R. does not manufacture coupe quarter panels, however the Real Steel... read more...

1933-1934 Deck Lid from Steve's Auto Restorations

S.A.R. 1933-1934 Deck lid (fits Roadster, Coupe, Cabriolet) Steve’s Auto Restorations in Portland Oregon has announced that their Real Steel ‘33/’34 Deck Lid is back in production! Following a brief hiatus, S.A.R. has commissioned a new stamping facility to produce the ‘33/’34 deck lids which is one of the hottest selling items from the S.A.R. Real Steel lineup. Every deck lid outer skin and... read more...

Mustang 50th Anniversary Custom Car Covers from Covercraft

In the spring of 2014 the Ford Mustang will celebrate 50 years as an American icon. In honor of becoming the newest member of a very exclusive club – vehicles in continuous production for 50 years – Ford created a custom logo to memorialize the occasion. Only 50 companies will be licensed to sell these commemorative special edition products. Covercraft is proud to be one of these select few,... read more...

Full Grip Shifter Knob from O'Brien Truckers

Full Grip Shifter Knob Fully polished. Feels like it was molded for your hand. Great for power shifting Metric and Standard thread adapters are available at reduced price when purchased with this Shit Knob. (Part numbers MTAM and MTAS) read more...

Auto Cross Series from Classic Instruments

Classic Instruments is pleased to announce the release of the Auto Cross™ series. Featuring a modern sport appearance, the gauges feature matte black, low step bezels with flat glass, and pool cue pointers. The design features clear, concise numerals and indices that are easy to read at any speed. The 200 MPH speedometer and 10,000 RPM tachometer feature etched diffuser rings while the vertically... read more...

Black Edge from Surf City Garage

The Wait Is Over! The new standard for detailing black and dark cars is now available. A deep, brilliant shine. An intense, jet-black tire gloss. Absolutely nothing makes a statement more than a black or dark car. And nothing makes that car more of a head-turner than Black Edge from Surf City Garage. Black Edge is the only complete, 100% safe detailing product line that's Enthusiast Grade® and... read more...

Speedway Motors Universal Brake System Builder Kit

Get everything you need to plumb your brake system in one easy-to-order package with the Universal Brake System Builder Kit from Speedway Motors. Speedway’s Universal Brake System Builder Kit comes complete with all the lines, valves, fittings, adapters and clips you need to set up a typical street rod or specialty vehicle brake system. This includes: • 25-foot roll of 3/16-inch mild steel brake... read more...

Speedway Motors Mustang II T-Bar Mockup Kit

Simplify the setup and installation of your Mustang II-style independent front suspension with a Mustang II T-Bar Mockup Kit from Speedway Motors. Speedway’s new Mustang II T-Bar Mockup Kit is the perfect way to determine your vehicle’s final ride height and verify critical dimensions during chassis construction. The easy-to-use T-bar assemblies are designed to bolt into the shock mount locations... read more...

EFI Fuel Tanks for 1964-67 GM A-Bodies

Looking to convert your A-Body car to EFI? Now there is an alternative to buying an expensive custom gas tank. No longer do you need to spend hours modifying your current tank. Tanks Inc. has designed an affordable stock style powder coated gas tank ready for fuel injection. When installed, this tank has the appearance of a stock gas tank. However, the tank has all the internal baffling needed... read more...

EFI Fuel Tanks for 1970-73 Camaro and Firebirds

If you are looking to convert your second gen (’70-’73) Camaro or Firebird to EFI and need a tank that won’t break your budget or require hours of modification, then you’ll want to check out the newest offerings from Tanks Inc. The company has designed an affordable stock-style powdercoated gas tank that has all the internal baffling needed for late model EFI engines. In addition to the internal... read more...

V Nerf Bars - McMillan Rod and Custom

These nerf bars built by McMillan Rod and Custom, though simple in design, will accent your car as well as provide some protection for the grill. They are 8” tall and bent to a V shape with 10” brackets and are built from high quality, solid type 304 stainless steel and polished to a mirror like finish. McMillan Rod and Custom are willing to custom build to your specifications. For more... read more...

1932 Ford Roadster Windshield - O'Brien Truckers

1932 Ford Roadster Windshield Solid Bronze two piece casting suitable for bead blasting, powder coating or chrome plating. Designed to fit the factory and Brookville cowls and slight grinding will allow it to fit other Deuce cowls - both steel and fiberglass. Due to the variations in cowls and the possible need to do some fitting, we do not sell the windshields polished or chromed. The... read more...

Three New Direct Fit Packages for Chevrolets - Classic Instruments

Classic Instruments is pleased to announce the introduction of three new direct fit packages for classic Chevrolet vehicles. The new direct fit packages are available for the 1951-52 Chevy car, 1954-55 “First Series” Chevy truck, and the 1964-65 Chevelle. The all inclusive direct fit packages feature instrumentation, model specific mounting hardware, and all necessary sending units. 1951-52... read more...

All American Dash Insert - J&B Microfinish

Hot off the milling machines of the J&B Microfinish shop floor is this brand new dash insert named the "All American". Designed with nostalgia in mind, this insert uses styling cues from both a 1932 Ford and a 1937 Hudson Terra Plane. The 6061-T6 billet insert comes standard with gauge bores that will accept all of the gauges offered by Classic Instruments. Custom sized bores for other brands... read more...

Universal Tubular K-Member from Pete & Jake's Hot Rod Parts

So there you are. A few years ago when you built your ride you put in a rear transmission mount that worked great with your Turbo 350. But just last week your trusted old friend shot craps and you found this sweet newly rebuilt overdrive transmission dirt-cheap and you want to slip it in as a replacement. Sadly you found out that now you have to cut the K-Member out, reposition it for the new... read more...

Coil Covers for LS Engines from Clayton Machine Works

Madison, Alabama – Clayton Machine Works (CMW) announces the highly anticipated release of their new coil covers for GM's LS engines. Unlike plastic or fiberglass versions, these CMW coil covers are machined from aluminum. Covers can be ordered in Black or Grey powder coated finishes, as well, customers have the option to order the covers un-finished so they can customize them to match their... read more...

Veda Spec Hub Caps from O'Brien Truckers

The very sought after Veda Spec Knock Off Style Hub Caps are back in production after a year's hiatus! Fits 1932 & up Ford or Kelsey wire wheel. Cap may fit other after market wire wheels. Cap O.D. measures 6 3/4" by 1" deep. Caps fit directly over the O.E.M or the Stainless steel 1932 V8 reproduction Ford cap (minus the stainless cover and with some machining). Caps are cast out of aluminum... read more...

O'Brien Truckers 2 BBL Scoop Air Cleaner

2BBL Scoop Air Cleaner patterned after the famous Cal Custom 40-30 scoop that came with a piece of screen to keep out small kids and large bugs. Fully polished sand cast aluminum 2BBL scoop fits all 2 5/8" neck carbs and is held in place with stainless steel set screw. Aluminum mesh and filtration foam are held in with four button head Allens. read more...

1928-29 Hallock Windshield from O'Brien Truckers

Patterned after the original windshield made by Duke Hallock in the late 1930's for the 1928-29 Model A's, this windshield allows you to style your '28-29 Model A roadster or RPU after the Auburn Speedsters that influenced Mr. Hallock Lightly-prepped two piece aluminum castings complete with rubber, machined glass channels and hardware: - Six 1/8" stainless steel roll pins are provided to hold... read more...

EZ-On Hose Press from Koul Tools

The engineers over at Koul Tools keep coming up with the most ingenious products! Their latest invention is called the EZ-On Hose Press, and it makes installing push-on hose fittings a snap! Check out the video below to find out how the EZ-On Hose Press will make your life that much easier! read more...

Classic Instruments - New Esquire Series

Classic Instruments is pleased to announce the release of the Esquire series. These new square gauges command respect and portray an image of stylish excellence.  Featuring a custom machined aluminum bezel, glass lens, chromed pointer, laser etched numerals, a warm grey and cream on a spun aluminum dial face and crisp LED lighting. Available individually or in a variety of set combinations that... read more...

Saldana's '67 Mustang Radiators

'67 Mustang Radiators Don't Let an Overheating Issue Cramp Your Style Cruise in style with a Saldana custom radiator. Our aluminum version of the ’67 Mustang radiator is built using a two-row core of 1” tubing. All of our aluminum cores are oven brazed, with no use of epoxy. The fin count is approximately 16 fins per inch, allowing for maximum heat dissipation. Every radiator is hand... read more...

Speedway Motors Firewall Mount Pedal Assemblies

Do you need a simple firewall-mount brake pedal or brake-and-clutch pedal combo for your street rod, vintage truck or other specialty vehicle? If so, Speedway Motors has a strong and affordable solution for you. Speedway’s Universal Firewall Mount Pedal Assemblies are engineered for simplicity, strength and easy installation. Sturdy steel mounting brackets can be bolted or welded to your vehicle... read more...

NEW 1933-1934 Ford Rear Bumper from McMillan Rod & Custom

  New from McMillan Rod and Custom is this rear bumper made specifically for a 33/34 Ford. Built from high quality, solid type 304 stainless steel and polished to a mirror like finish this is sure to accent your car as well as provide a little safety. While they build these to fit a stock Ford frame, they are always willing to custom build a unit to your specifications. View these and other... read more...

Titanium-Plus Vulcan Dual Tone Ultra Exhaust Wrap

Charlotte, NC - Performance Plus Connection, a North Carolina-based distributor of automotive parts for the racing and hot rod/street rod markets announces Titanium-Plus Vulcan Dual Tone Ultra Exhaust Wrap, an insulating wrap for use on all high performance exhaust or turbo applications. Get the custom look of carbon fiber while reducing heat and increasing horsepower. Heat can be the enemy of... read more...

Butch's Cool Stuff 1932 and 1933/34 Ford Front V Spreader Bars with LED Lights

New from Butch's Cool Stuff! 1932 and 1933/34 Ford Front "V" Spreader Bars with LED parking lights and turn signals. 1-3/4" highly polished stainless steel with hidden welds and super bright electronics.  Wires exit on each side near mounting brackets and can be easily hidden along inside of frame rail. Includes all mounting hardware. These high quality Spreader Bars are manufactured in Dayton,... read more...

New Classic Chevy Now Offers Camaro, Chevelle, Nova and Chevy II Parts

Newclassicchevy.com is pleased to announce the addition of classic Camaro, Chevelle and Nova/Chevy II parts to their product offering! You have come to know them for their Tri Five parts and they have just expanded their wide offering of sheet metal, exterior and interior trim parts. Check out the full line up for your 1967-69 Camaro, 1962-72 Chevelle and 1962-74 Nova/Chevy II. www.... read more...

1967-1972 F100-350 Ford Truck Classic Update Kit from American Autowire

American Autowire's Classic Update Kits give you one of the most complete kits on the market to "make wiring that easy." The new 1967-1972 Ford F100-350 Truck Classic Update Kit is no exception. The kit boasts 14 features making it the most complete system of its type in the industry.  This 1967-1972 Ford F100-350 Truck Classic Update Kit is part number 510368 and will be available on July 8,... read more...

Wheel Vintiques Offers Classic Truck Wheels in Many Sizes

Your Source for Steel Wheels for Restored and Custom Pickups Wheel Vintiques is the world’s largest supplier of steel wheels for hot rods, muscle cars and classic restorations. In addition to its vast product line for passenger cars, Wheel Vintiques also offers a selection of sizes, styles and lug configurations that are designed specifically for use on your classic truck. From OE sizes and... read more...

Krist Kustoms Chrome Seat Medallion

The popular seat medallions from Krist Kustoms are now available in chrome! These are small, chrome plated metal medallions that give your seats a nice eye-grabbing detail to make them stand out from the rest. Four styles are now available; Two-Part Oval with a customizable insert, Triangle, Simple Oval, and their new Halo medallion. These medallions start at $15 a piece, and are also available... read more...

Tanks Inc - EFI Fuel Tanks for 1962-67 Chevy Nova’s

Tanks Inc. has added another EFI ready tank to their lineup.  This die stamped powdercoated tank has the appearance of a stock tank with the internal baffling necessary for fuel injection.  The top of the tank is recessed to provide adequate floor clearance for fuel lines and fittings with no modifications to your car.  Tanks Inc. has replaced the factory sending unit with the standard SAE 5 bolt... read more...

Tanks Inc - EFI Fuel Tanks for 61-64 Chevy Cars

If you are looking to convert your Impala to EFI and need a tank that won’t break your budget or require hours of modification, then you’ll want to check out the newest offering from Tanks Inc.  The company has designed an affordable stock-style powdercoated gas tank that has all the internal baffling needed for late model EFI engines.  This tank also features a recessed area for the fuel pump... read more...

Hurst Shifters Nitro Stick – Aluminum and Black

Nitro Stick – Part# 538100 (Aluminum) Part# 5381001 (Black) The new Nitro Stick shift handle is designed to bring the classic ‘pistol grip’ well into the 21st Century. Machined from billet aluminum, the Nitro stick provides a positive grip for quick, solid shift action from any Hurst shifter using the two-bolt handle attachment. Available with a trick built-in 12 volt momentary switch, the Nitro... read more...

Hurst Shifters V-Matic 3 Shifter

V-Matic 3 Shifter - Part# 3838530 The V-Matic 3 features a dual mode operation for street performance or all out racing for all popular 3 & 4 speed automatics. It features a highly polished shifter lever and brushed aluminum Hurst T-handle. The V-Matic 3 features a trigger operated reverse Loc/Out that meets NHRA and IHRA requirements, and also incorporates a neutral safety and back up light... read more...

CPP’s New Deluxe Idler Arm for Novas

Classic Performance Products, Inc. introduces its Deluxe Idler Arm for 1963-67 Novas. This heavy duty arm is an upgrade for any Nova steering, and a perfect compliment to CPP’s Mini™ Subframe and 400 Series™ steering box. The design of CPP’s Deluxe Idler Arm will eliminate the steering play associated with the original design and is highly recommended when running large wheels and tires on your... read more...

Pages