VIP Sponsors


Speedway Motors Universal Brake System Builder Kit

Get everything you need to plumb your brake system in one easy-to-order package with the Universal Brake System Builder Kit from Speedway Motors.

Speedway’s Universal Brake System Builder Kit comes complete with all the lines, valves, fittings, adapters and clips you need to set up a typical street rod or specialty vehicle brake system. This includes:

• 25-foot roll of 3/16-inch mild steel brake line

• Dual outlet master cylinder brake lines

• Six 60-inch long 3/16-inch brake lines

• Wilwood proportioning valve

• Residual valves (two 2psi and one 10psi)

• Six 3/8-24 IFF to 1/8-inch NPT male straight adapters

• Two 90-degree 3/8-24 IFF to 1/8-inch NPT male adapters

• 3/8-24 IFF to #3 brake fitting

• 3/8-24 IFF to 1/8-inch NPT female tee adapter

• AN3 male to 1/8-inch NPT male adapter

• Brake line tabs

• Five 3/8-24 IFM thread nuts

• 10 3/16-inch insulated line clamps

Why shop for dozens of individual components when one part number provides you the perfect starting point to get your stopping system plumbed in style. Check out your Speedway Motors catalog or visit for full details on this great kit.

Speedway Motors is your performance parts connection for carburetors, intake manifolds and fuel system components! Whether you need period-perfect vintage air cleaners for your Strombergs or linkage for that tri-power setup, Speedway has you covered. Or, go wild with a supercharger kit or dual quads atop a tunnel ram – all topped with a Shotgun Bill scoop! Don’t forget to feed your induction needs with a high-quality gas tank and performance fuel pump, too!


Just call 800.979.0122, or visit our website for more infoSpeedway Motors is America’s Oldest Speed Shop® and has made street rodding safe, fun and affordable since 1952.