Rust Bullet Metal Blast – HotRod Hotline

Rust Bullet

Rust Bullet Metal Blast

Rust Dissolver, Surface Cleaner and Conditioner

Rust Bullet® Metal Blast™ is a cleaner and conditioner for metal that removes rust, grease, and contaminates allowing a superior bond to surfaces that have minimal or poor adhesive qualities. Metal Blast removes surface rust and properly etches metal for better paint adhesion. Metal Blast enhances the adhesive properties of coatings on any metal surface including aluminum and shiny polished metal. Metal Blast creates an ideal anchor pattern to surfaces allowing superior adhesion of allRust Bullet Coatings. Metal Blast dissolves rust from metal tools and equipment as well as other rusted surfaces adding years of performance to any paint project.

Metal Blast simple process lightly etches metal, thus eliminating the high cost of extensive surface preparations. Apply Metal Blast to bare metal. Spray, flow-brush, dip or wipe Metal Blast on the surface to be cleaned. Allow Metal Blast to remain on the surface long enough to loosen the rust and etch the metal, approximately two to 20 minutes depending on the degree of rusting. Small parts may be immersed until clean. While the surface is wet with Metal Blast, wipe with a clean cloth in a smooth, even direction. Lightly scuff problem areas with an abrasive scrub pad making certain the surface is smooth and clean.

For heavily rusted areas, soak the surface for 20 minutes to three hours by using a cotton cloth or folded paper towel saturated with Metal Blast. Buff the area with an abrasive pad and rewet with Metal Blast. Buff the area again when all the rust is removed. The surface cleaned with Metal Blast should be rinsed with water, preferably hot; or just wiped with a clean rag and permitted to dry thoroughly prior to the application of any Rust Bullet coating or desired paint.

Benefits of Rust Bullet Metal Blast

Easy to use – wipe on, wipe off

Dissolves rust

Cleans and conditions metal surfaces

Properly etches and conditions metal for better paint adhesion

Discourages the formation of rust under coatings and paints

Cleans and prepares metal for painting

Prevents the formation of flash rust

Eliminates future peeling of paint

Prepares metal for welding and soldering

Available in 24 ounce, 1 gallon, 5 gallon, and 55 gallon containers

Made in the USA

Rust has been a problem which humanity has been fighting since the dawn of the Iron Age. Although various prevention strategies have been discovered and developed, they all had flaws and short comings that limited their usefulness. They were either very complicated to apply, required multiple steps with a highly trained work force and ideal working conditions, or they were simple to apply but didn’t work very well or last very long. Rust Bullet® is a simple, easy to apply, rust/corrosion control product that is more effective on both clean metal and rusty metal than any other (in the field use) product on the market. The phenomenal results achieved after years of refinement and three years of extensive scientific testing, along with two (2) United States Patents awarded by the United States Patent and Trademark Office confirms Rust Bullet® is the best rust/corrosion control product on the market.
Rust Bullet®… It Kills Rust!

Rust Bullet, LLC
Corporate Headquarters
300 Brinkby Avenue, Suite 200
Reno, NV 89509

www.RustBullet.com

Rust Bullet

By hrhwp